Small Volume Magnetic Bead Separators for Research & Analytical Workflows
Sepmag LITE, LAB and CELL are small volume magnetic bead separators designed for research, assay development and analytical workflows.
Choose the system according to your application: LITE for protein and antibody purification, LAB for DNA and RNA extraction, and CELL for cell isolation.
Compatible with standard laboratory tubes and working volumes from approximately 0.5 to 35 mL.
Choose the Right Small Volume Magnetic Bead Separator
Sepmag LITE, LAB and CELL offer different magnetic force configurations to suit different bead characteristics and applications. Selection should consider bead size, magnetic responsiveness and the intended workflow, not working volume alone.
Sepmag LITE — For Protein, Antibody and Biomolecule Purification
Choose Sepmag LITE for small-volume protein and biomolecule purification workflows.
It is particularly suited to protein and antibody purification, immunoassays and IVD assay development where high recovery and reproducible separation are important.
Tube capacity: 3–4 tubes simultaneously
Compatible tubes: 1.5, 2, 15 and 50 mL
Working volume: approximately 0.5–35 mL
Sepmag LAB — For DNA & RNA Purification
Choose Sepmag LAB for magnetic bead-based nucleic acid extraction.
It is designed for DNA and RNA purification workflows where efficient bead recovery directly affects yield, purity and downstream analytical performance.
Typical applications include genomic DNA, plasmid DNA, RNA, PCR/qPCR sample preparation and sequencing workflows.
Tube capacity: 1–4 tubes simultaneously
Compatible tubes: 1.5, 2, 15 and 50 mL
Working volume: approximately 0.5–35 mL
Sepmag CELL — For Cell Isolation
Choose Sepmag CELL for cell isolation and enrichment workflows using magnetic nanoparticles.
It is designed for applications where cell recovery, viability and functionality must be preserved for subsequent analysis or culture.
Typical applications include immune cell isolation, stem cell workflows, rare cell enrichment, flow cytometry and cell culture.
Tube capacity: 1 tube
Compatible tubes: 1.5, 2, 15 and 50 mL
Working volume: approximately 0.5–35 mL
What You Gain in Small Volume Magnetic Bead Separation
Improve Recovery
Consistent magnetic bead collection before supernatant removal helps reduce sample loss during washing. Final recovery also depends on bead chemistry, binding conditions and handling.
Improve Reproducibility
Use defined magnetic separation conditions instead of depending on bead position or operator judgement.
This helps reduce experiment-to-experiment variability and makes protocols easier to reproduce between users and laboratories.
Reduce Bead Aggregation and Improve Resuspension
Constant magnetic force helps avoid excessive local bead aggregation, supporting easier resuspension between washing and elution steps. Aggregation also depends on bead properties and buffer conditions.
Measure and Optimize Magnetic Bead Separation
Sepmag MONITOR records real-time optical separation curves with compatible LITE, LAB and CELL systems.
Compare separation kinetics, t₅₀, endpoints and bead lots to optimize protocols and evaluate reproducibility.
Monitoring characterizes bead separation behavior; target recovery, purity and cell viability require separate analytical verification.
Why Sepmag Small-Volume Separators Differ from Conventional Magnetic Racks
Unlike conventional magnetic racks, Sepmag systems use a 360° radial magnetic configuration to apply constant magnetic force throughout the working volume.
This provides controlled bead collection toward the vessel walls, reduces excessive local bead compaction and supports reproducible separation and easier resuspension.
With Sepmag MONITOR, compatible systems can also measure separation kinetics in real time, allowing users to compare experiments and determine an objective separation endpoint instead of relying only on fixed waiting times.
Compatible Tube Sizes and Working Volumes
All three product families support common laboratory tube formats.
The correct separator is determined primarily by the application and magnetic beads, rather than sample volume alone.
For workflows beyond these volumes, Sepmag offers dedicated systems for process development, scale-up and GMP manufacturing.
Clients
Trusted by leading life science companies:
Frequently Asked Questions
What is a small volume magnetic bead separator?
A small volume magnetic bead separator is a benchtop system designed to separate magnetic beads in laboratory-scale samples. Sepmag LITE, LAB and CELL support working volumes from approximately 0.5 to 35 mL.
What is the difference between Sepmag LITE, LAB and CELL?
The systems are optimized for different workflows. LITE is designed for protein and antibody purification, LAB for DNA and RNA purification, and CELL for cell isolation.
Is Sepmag MONITOR required to operate LITE, LAB or CELL?
No. Sepmag LITE, LAB and CELL maintain their magnetic separation performance with or without monitoring. When equipped with MONITOR, users can record separation curves, compare runs and determine objective separation endpoints.
Can a Sepmag separator process 50 mL of sample in a 50 mL tube?
The recommended working volume for a standard 50 mL tube is 17.5–35 mL. Sepmag also supports smaller sample volumes using compatible 1.5, 2 and 15 mL tubes.
Find the Right Separator for Your Workflow
Tell us your:
Application → magnetic beads → tube format → working volume
We will help you identify the appropriate Sepmag system for your research or analytical workflow.



